Emergency LED ATEX E856

Description

Polyester case reinforced with fiberglass.
Diffuser in polycarbonate injected in white.

Weekly and annual automatic test function. Possibility of manual testing.

Easy battery replacement thanks to its connector.

Detachable white reflector, which includes encapsulated LED modules.
Centralized closure with 13 mm hexagonal wrench.

Permanent mode: If there is no network failure, the luminaire is on. With network failure, emergency mode light flow.

Emergency mode (non-permanent lighting): The equipment only works if there is a power failure with the emergency mode light flow.

TECHNICAL DATA

Use in hazardous areas:
II 2G Ex db eb eb [ib] mb op is q IIC T4 Gb
II 2D Ex op is tb IIIC T80ºC Db

Certificate: Type examination certificate

Body: Fiberglass reinforced polyester

Diffuser: Polycarbonate

Led:
Modules 6500K, Ra normally 80
L 70 B 10 > 80,000h, L 80 B 50 > 80,000ha max. Room temperature

Battery: NiCd, electronic charger

Charging time: 24h

Operating temperature: -30ºC to 55ºC

Operating frequency: 50/60 Hz

Operating voltage: 220 / 240V AC

Degree of protection: IP66

Connection: 4 terminals 2.5 mm 2

Cable inlets: 1xM25X1.5 polyamide cable press | 1x Polyamide plug M25X1.5